Sliding French Patio Door Multipoint | Drop Handle Sets Brushed Chrome

This listing is for the "Brushed Chrome Finish"  - Caradco, Fuhr, Kolbe, Weather-Shield and other sliding Patio Door Assembly Parts | Multipoint Inline Slider Handle Sets, Active and Inactive Package Consists of ONE (1) Each, handle assembly as shown, ACTIVE SIDE and other associated replacement parts and ONE (1) Each, handle assembly as shown, INACTIVE SIDE, or Dummy Handle Set. Both, Brushed Chrome Finish.   Optional available finishes also available in a OIL Rubbed Brass and the Bright Polished Brass Finish; these are available on a limited basis.

1. Active Side, This is the panel that actually operates—the one you slide open and closed. What it does - Moves along the track. Contains the main locking mechanism (mortise lock, hook lock, etc.). Accepts a full handle set: inside lever + outside pull + latch/lock hardware. Think of it as: The “working” door panel.

2. Inactive Side With a Thumbturn, This is the fixed or stationary panel, but it still has a functional lock component. What it does - Does not slide. Has a thumbturn on the inside that operates a flush bolt or auxiliary lock. The thumbturn usually throws a bolt into the head jamb or sill to secure the stationary panel. Why it exists - Even though the panel doesn’t move, it still needs to be locked in place so the active panel can latch securely against it. Hardware style, often looks like a handle set, but the “handle” doesn’t operate anything and the thumbturn is the only functional part.

3. Dummy Side Set - This is the simplest of the three. What it does, Provides appearance only—no moving parts. Used on a panel that is completely fixed and doesn’t require any locking or latching. The handles are just pulls or trim piece so the door looks symmetrical. Typical use on a fixed panel where the active door locks into the frame, not into the other panel. On French doors where only one leaf is operable and the other is permanently fixed.